Hight Temperture Humidity Environment Test Equipment

• Customization: Available
• Certification: CE, TUV, ISO
• Warranty: 1 Year
• Model NO.: C-150
• HS Code: 8514109000
• Production Capacity: 500pieces/Years

Product Description

1.What is high temperature humidity environment test chamber?
High temperature and humidity test chamber is a kind of laboratory equipment used to simulate high temperature and humidity environment. It is widely used in electrical, electronic, instrumentation, aerospace, automotive, food, medicine and other industries to test the performance, reliability and durability of products or materials under high temperature and humidity conditions.

2.Operational Principle:
(1) Air regulation mode: forced ventilation internal circulation balance temperature regulation;
(2) Air circulation device: built-in air conditioning device, circulating air duct, long axis axial flow fan;
(3) Heating method: high-quality nickel-chromium alloy electric heater. Room structure
(4)Box structure: the box adopts the overall structure;
(5)Shell material: high quality cold rolled steel sheet electrostatic spraying;
(6) Inner wall materials: stainless steel plate coated with iron fluorine dragon;
(7) Insulation material: ultrafine glass fiber;
(8)Door seal: use environmentally friendly silicone rubber strip.

3. Core functions:
(1) Environmental simulation
The test chamber can accurately control temperature and humidity, simulating extreme climate conditions such as tropical rainforest and desert. The temperature range is usually-70ºC to +150ºC, and the humidity range is 20% to 98%RH, which meets the testing requirements of different products.
(2) Performance testing
It is used to evaluate the waterproof, moisture-proof and corrosion-resistant performance of products under high temperature and humidity environment, as well as circuit stability, insulation performance and life. For example, short circuit risk test of circuit board under high humidity condition, safety assessment of wet heat cycle of lithium battery, etc.
(3) Accelerated aging test
By simulating extreme wet and hot conditions, the aging process of products is accelerated to predict the life and reliability of products in actual use, and help researchers find design defects and make improvements.

4. Technical features
(1) Precise control system
Advanced temperature and humidity control system, such as imported microcomputer temperature and humidity integrated controller, can achieve precise control of temperature ±0.1ºC and humidity ±0.1%RH to ensure the accuracy and reliability of test results.
(2) Efficient refrigeration and heating system
The refrigeration system adopts the original French "Taikang" full closed compressor, and the freezing system adopts the unit or binary low temperature circuit design to ensure rapid cooling and stable operation. The heating system adopts nickel-chromium alloy electric heater, which has fast heating speed and high efficiency.
(3) Humidification and dehumidification system
The humidification system adopts an external isolated full stainless steel boiler shallow surface evaporation humidifier, and the humidification effect is uniform. The dehumidification system adopts an evaporator coil dew point temperature laminar flow contact humidifier to ensure the accuracy of humidity control.
(4) Safety protection design
The equipment is equipped with multiple safety protection functions, such as leakage protection, over-temperature protection, water shortage protection, etc., to ensure safe and reliable operation. The box body adopts double layer high temperature resistant and aging resistant silicone rubber sealing strip to prevent temperature loss.

5.Description

Product	Hight Temperture Humidity Environment Test Chamber
Item No	C-150
Temperature range	10~180ºC
humidity range	40%rh to 98%rh
Inside dimensions(W*H*Dmm)	500*600*500

6.Customized Chamber Safety Precautions
(1)Over temperature protection setting: triple over temperature protection setting.
(2) Set temperature of the over temperature dial = set temperature + 15ºC. When the temperature in the box is out of control and exceeds the set temperature of the over temperature dial, the buzzer in the box alarms, the box is in standby state, and should be reused after manual reset.
(3) Over temperature alarm of the controller: when the product in the box continues to heat up and exceeds the temperature set by the internal parameters of the controller, the buzzer in the box will alarm, which should be manually reset and then reused.
(4)The third level of protection is controlled by the anti-dry burning protector. When the heating pipe is uncontrolled and continuously heated, the anti-dry burning protector senses the temperature and then transmits the signal to the controller for alarm.
(5) Phase sequence protection: the reverse phase connection or the missing phase connection of the main power supply is detected, and the device stops running.
(6) Humid air burning protection switch

7.Other

Model					Temperture			Humidity		Inside capacity
Temperature Humidity Chamber	Temperture Humidity Chamber				-20ºC-180ºC			20%rh to 98%rh		27L 64L 100L 150L 270L 408L 608L 1000L
	Ultra-Energy-Efficient Low Temperture Humidity Chamber				-40ºC-180ºC					150L 270L 408L 608L  1000L
	Low Temperture Humidity Chamber				-40ºC-180ºC					100L 150L 270L 408L 608L 1000L
	Ultra Low Temperture Humidity Chamber				-70ºC-180ºC					64L 100L 150L 270L 408L 608L 1000L
	High Temperture Humidity Chamber				ambient temperayure 10ºC-180ºC			40%rh to 98%rh		100L 150L 270L 408L 608L 1000L
	Low Temperture Low Humidity Chamber				-40ºC-180ºC			5%rh to 98%rh		100L 150L 270L 408L 608L 1000L
	Clean Temperture Humidity Chamber				-20ºC-180ºC			30%rh to 98%rh		408L
Chamber Temperature	Ultra-Energy-Efficient Low Temperture Chamber				-40ºC-180ºC			-		270L 408L  608L 1000L
	Low Temperture Chamber				-40ºC-180ºC
	Ultra Low Temperture Chamber				-70ºC-180ºC
(To customers: This  chamber is a customized product.  Welcome to consult the customer service for further understanding of the detailed product specification and formal quotation.)

FAQ
Q: Can I get a sample before I place an order?
A: Provide free samples for quality verification or testing. We will charge the sample fee and shipping fee first, and the sample fee will be refunded after the bulk order is published.

Q: How long does it take to ship?
A: 1)The delivery time is 30-45 days in peak season and 30 days in off-season
2) Upon receipt of full payment, the goods will be delivered via DHL, UPS, TNT, FedEx and EMS or by sea.
3) By air, usually you can receive the goods within 3-5 days or 5-7 days after our shipment. By sea, it usually takes 15-30 days.

Q: What if there is a problem with the machine?
A: Our warranty period is generally 24months, if the damaged parts within 24 months are non-human factors, we provide free replacement. If more than 24 months, the customer shall bear the cost of return shipping and spare parts.

Q: What kind of after-sales service can you provide?
A: We will reply to you by email or phone within 12 hours, once we send the goods, we will track the shipment until it is received, and we will be responsible if any quality problems occur during the quality assurance period.

Q: What are the terms of payment?
A: We accept T/T or cash or in-platform payments.


Q:How to Contact Us?
Please Send your inquiry Details in the below for our quotation,Click "Send" Now!   

Q:About Packaging:
Our test chamber are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.